Indian Bangles Size Chart
Indian bangles are measured in terms of bangle diameter. This is the length of a line passing through the centre of a bangle, starting from one of a circumference and ending at the other end.
|Bangle Size||Inner Diameter (cms)|
|2/3 (Extra Small)||5.84|
|2/10 (Extra Large)||7.60|
NOTE: These measurements are for rough idea only. Sizes can vary slightly up/down for some designs.
Steps to measure your hands for the right fitting bangle.
- Take a flexible tape measure.
- Bring all your fingers together as if you are about to wear a bangle and then using the measuring tape, measure around the widest part of your hand.
- Make a note of the actual circumference of your hand and compare this value with the diameter values mentioned above to identify the correct bangle size.
TIP: In some styles of bangle, it is recommended that one should buy one size up from the actual measurement of the hand, for ease in gliding in the bangle on to the wrist.
Rings Size Chart
Although different countries have different sizing methods, most of the world goes by number sizing which is the easiest and most accurate way. However countries like Australia and India use letter sizing. Since Punjaban Diva is an Australian Brand with Indian heritage, we decided to label our rings with number sizing. The most common size for Ladies is a size 7. The best way to work out your size is to measure the inner diameter of one of your own rings. Then look at our chart to see which size has the closest measurements.
||Ring Circumference||Inner Diameter|
|J, K, L||5||49.3mm||15.6mm|
|L, M, N||6||51.8mm||16.45mm|
|N, O, P||7||54.4mm||17.3mm|
|P, Q, R||8||56.9mm||18.2mm|
|R, S, T||9||59.5mm||19.0mm|
|T, U, V||10||62.1mm||19.8mm|
|V, W, X||11||64.6mm||20.6mm|
|X, Y, Z||12||67.2mm||21.4mm|
Shoes Size Chart